序号 No. |
技术参数 Technical parameter |
单位 unit |
型号 model |
||||||
J21-63 |
J21-80 |
J21-100 |
J21-125 |
J21-160 |
J21-200 |
||||
1 |
公称力 normal force |
KN |
630 |
800 |
1000 |
1250 |
1600 |
2000 |
|
2 |
滑块最大行程 the Max. slider stroke |
mm |
100 |
120 |
130 |
140 |
160 |
180 |
|
3 |
行程次数 Stroke times |
Min-1 |
50 |
45 |
45 |
45 |
40 |
38 |
|
4 |
最大装模高度 maximum height for die assembly |
mm |
280 |
300 |
320 |
320 |
350 |
450 |
|
5 |
装模高度调节量 Die assembly height adjustment |
mm |
80 |
100 |
100 |
100 |
120 |
140 |
|
6 |
滑块中心至机身距离 The slider center distance to the fuselage |
mm |
270 |
280 |
300 |
300 |
380 |
400 |
|
7 |
工作台有效尺寸 Effective area of workbench |
前后front&back |
mm |
450 |
480 |
550 |
620 |
680 |
700 |
左右left&right |
mm |
760 |
760 |
820 |
960 |
1150 |
1400 |
||
8 |
滑块底面尺寸 Slide bottom size |
前后front&back |
mm |
220 |
280 |
300 |
350 |
580 |
600 |
左右left&right |
mm |
280 |
300 |
450 |
540 |
470 |
500 |
||
9 |
模柄孔尺寸 Shank hole size |
直径 diameter |
mm |
50 |
60 |
60 |
60 |
70 |
70 |
深度depth |
mm |
80 |
75 |
80 |
80 |
90 |
100 |
||
10 |
电动机 motor |
型号 |
|
Y132M2-6 |
Y160M-6 |
Y160M-6 |
Y160L-6 |
Y180L-6 |
Y180L - 6 |
功率 |
KW |
5.5 |
7.5 |
7.5 |
11 |
15 |
22 |
||
由于产品不断改进中,如出现此参数与实际数据不一致出,应遵照双方的技术参数协议,恕不另行通知。 Because in the continuous improvement of products, if there is difference between this date and technical data, should comply with the technical agreement parameters on both sides. No further notice! |